2020. 2. 10. 15:03ㆍ카테고리 없음
Hi,i have a problem:i assembled a mini itx system formed byi7 2600kasrock z68m-ht itxgtx 5702x wd caviar blue raid 0I managed to install lion setting the hard drive in ahci and everything works without problems,but,i lost the chance of raid 0 (because I can select in the bios only raid or ahci),and so windows whic is installed in the raid not work.I was wondering if there was a way to start lion without hard drives are set in ahci.or install lion directly on raid 0 volume.or is possible by an external hard disk?sorry for my bad english! Hehe, what do you think? VENdor 8086 (Intel) DEVice 2822 (ICH8/9R) read this:As you can see the Device ID changes when it's set to RAID mode, that's why it stops working, add 2822 to AHCIPortInjector or replace 2821 with 2822. Remember to change 106 to 104 as well.Don't mess with AppleAHCIPort.kext like the link says, edit AHCIPortInjector instead. This way your system doesn't stop booting if Apple should update AppleAHCIPort.kext. And, as long as you keep the injector in /Extra/Extensions, there's no need to do all the other stuff on that page either. Chameleon doesn't care about permissions or ownership on anything in the /Extra hierarchy.
Great, well done!I don't know if Chameleon can boot Windows in RAID mode.Until you find out how to get it to work, you could set it up like I have (except I don't have RAID) - Windows boots by default and I never see Chameleon.When I want to boot into OS X I press F8 during POST to bring up the BIOS' boot selector and pick the drive with OS X on it. Chameleon then quietly boots OS X.Make sure you never give OS X write access to your NTFS drives, this would probably f.k up your RAID. Unless I misunderstand how that works.
Install Osx86 Without Ahci Raid 2
You need to install the correct driver for your AHCI storage controller before changing the mode in the BIOS.If you don't do so, after switching the mode Windows cannot load the storage controller driver needed to access the boot volume. Because this driver is loaded before the Plug and Play Manager, Windows can't automatically detect or otherwise search for the correct driver.Pre-installing the driver should solve this.That said, you don't mention the reason you want to do this, but if it's for reason of performance, in my experience there's no difference between the two modes on Dell XPS machines.